Specifications

3
Basic Operations
3-22 Orientation
Vertical Placement
Horizontal Placement
Remark
If the top edge of the original is not aligned with the
back edge of the platen glass (by the arrow in thetop
left corner), your original may not be scanned correctly,
depending on the copy mode that you have set.
Originals of the following sizes can be placed either
vertically or horizontally. However, the scanning speed
for horizontally placed originals is somewhat slower
than that of vertically placed originals. Place originals
horizontally when copying with a Preset Zoom, such as
when enlarging an A4 original onto A3 paper.
Platen glass: A4 and A5
Feeder: A4
Horizontally placed A4 and A5 originals are referred to
as A4R and A5R.
A3 originals must be placed horizontally.
Acesst 1.0 6251194