Specifications

3
Basic Operations
3-12 Entering the Department ID and Password
If no password has been set, proceed to step 2.
The numbers that you enter for the password are displayed as asterisks (*******).
If you make a mistake when entering the Department ID or password, press → enter the correct
values.
2. Press (Log In/Out).
The Basic Features screen of the selected function appears on the touch panel display.
If the Department ID or password that you entered is incorrect, the message <This number has not been
registered. Enter the number again.> appears. Repeat this procedure from step 1.
3. When your operations are complete, press (Log In/Out) on the control
panel.
If you are using a control card, remove the control card, and take it with you. (See "Optional
Acesst 1.0 6251194