Specifications

3
Basic Operations
3-10 Values in Inches
Values in Inches
If you want to enter values in inches in all modes, which require a numeric entry, set Inch Entry
to 'On' in Common Settings (from the Additional Functions screen). (See "Additional
Functions(p.5-1).") This enables you to enter values in inches when you press [Inch] on a
screen requiring a numeric entry or measurement.
The following example shows you how to enter 1 1/2" for Original Size in the Zoom Program
mode.
1. Press [1] → [_] → [1] → [/] → [2] using the numeric keys on the touch
panel display.
If you make a mistake when entering values, press [C] on the touch panel display → enter the correct
values.
You can enter only 2, 4, 8, or 16 as the denominator.
The value entered in inches is converted to millimetres by the machine each time it is entered. Thus, there
may be a slight difference between the value calculated and the actual value entered.
To enter values in millimetres, press [mm].
Acesst 1.0 6251194