Specifications

6
Security
6-94 Detecting and Installing Drivers that Support Functions Specified on the Machine into Your
Computer
Detecting and Installing Drivers that Support Functions
Specified on the Machine into Your Computer
From the machine, you can specify functions suitable for the fax board or printer kit installed in the
machine. From your computer, you can detect and install drivers that are compatible with the
specified functions.
Remark
The PDL Selection (PnP) function is displayed in the
following cases:
When two or more types of PDL print functions are
enabled
When one or more type of PDL print function is
enabled and an optional fax board is installed
If the desired driver is not in your computer, detection
and installation cannot be performed.
1. Press → [System Settings] → [PDL Selection (PnP)].
2. Select the button for the function that is applicable to Plug and Play
settings → press [OK].
The displayed function buttons may differ, depending on the optional equipment that is
attached.
Changes are only effective after you restart the machine (the main power switch is turned OFF, and then
back ON). For instruction on restarting (turning the main power switch OFF and then ON) the machine, see
"Before You Start Using This Machine."
Acesst 1.0 6251194