Specifications

1
Before You Start Using This Machine
1-30 Shutting Down the Machine
Shutting Down the Machine
If there are any jobs currently being processed, or a MEAP application is running when the Shutdown
mode is activated, the machine asks you to confirm and cancel any existing jobs, and then access to
the hard disk is restricted. This procedure protects the hard disk from access errors the next time the
machine is turned ON. When the machine shuts down, it also performs an internal cooling down
process, which enables the machine to be shut down safely. Follow the instructions below to safely
shutdown the machine.
Remark
If you turn the main power of the machine OFF without
following the procedure below, copies output the next
time the machine is turned ON may not be printed
correctly. In this case, printing will return to normal after
a certain number of copies are output.
1. Press and hold the control panel power switch for more than three
seconds.
If the machine is in the Sleep mode, press the control panel power switch one time to cancel
the Sleep mode, and then press and hold the control panel power switch again for more than
three seconds.
The job confirmation screen is displayed.
Do not initiate the Shutdown mode while fonts are being downloaded.
You can also force the machine into the Shutdown mode by pressing → [Common Settings] →
[Shutdown Mode].
You cannot force the machine into the Shutdown mode in the following cases:
When the machine is receiving and updating device information
When the machine is browsing device information
When the machine is importing or exporting data using the Remote UI function
In a rare instance, the machine may not go into the Shutdown mode even if you press and hold the control
panel power switch for more than three seconds. In this case, follow the instructions on the touch panel
display to turn OFF the main power.
If print data is sent while the machine is in the Shutdown mode, the machine may receive the data,
depending on the print data's size. However, the print data is not printed.
Acesst 1.0 6251194