Specifications

6
Security
Setting Automatic Delivery 6-63
Setting Automatic Delivery
You can set to automatically deliver device information at a specified time. You can also select which
information to deliver.
Remark
When delivering device information, the following
machines will not update their information:
Machines which are processing a send job
Machines importing or exporting data via the
Remote UI
Machines which are executing functions from the
Additional Functions screen
In addition to the above, machines which are having
their address books accessed or are sending a job will
not update their address books, and machines
performing a print job will not update their Printer
Settings.
Machines which could not receive device information
because of a power failure or network trouble, will not
receive updated information until the first automatic
update after the machine recovers.
Device information is not delivered if the machine goes
into the Shutdown mode, even if an automatic delivery
time is set.
1. Press → [System Settings] → [Device Information Delivery Settings]
→ [Auto Delivery Settings] under <Transmitting Settings>.
2. Select [Everyday], [Select Days], or [Off].
●
If you select [Everyday]:
●
If you select [Select Days]:
●
If you select [Off]:
If you select [Everyday]:
Acesst 1.0 6251194