Specifications

6
Security
6-58 Registering Delivery Destinations
Enter the I P address of the destination or FQDN (Fully Qualified Domain Name)
(i.e., starfish.organization.company.com) → pres s [OK].
For instructions on entering characters, see "Basic Operations(p.3-1)."
If any of the following is true for the destination machine, a message <Could not retrieve information for the
device to register. Register as a destination?> is displayed. If you press [Yes], <Deliverable Settings> on
the Details screen will be blank.
The main power is turned OFF
The destination machine is not connected to the network
A default key is not set
Every function in Receive Restriction for Each Function under <Receiving Settings> in Device
Information Delivery Settings is set to 'On'
To automatically search for destinations:
Press [Auto Search/Register].
Press [Auto Search Start].
To display the search results as host names, press [Display Host Name].
Press [-] or [+] to set the search depth (how many routers to search).
Since searching uses SLP (Service Location Protocol), machines behind a router will not be detected if the
router is set to restrict passing with the SLP protocol.
If any of the following is true for the destination machine, you cannot search the destination.
The main power is turned OFF
The destination machine is not connected to the network
Every function in Receive Restriction for Each Function under <Receiving Settings> in Device
Information Delivery Settings is set to 'On'
Acesst 1.0 6251194