Specifications

6
Security
6-42 Use HTTP Server
Use HTTP Server
Set Use HTTP to 'On' to access this machine from a Web browser, and utilize the installed MEAP
applications.
Remark
To manage user information for the Local Device
Authentication system of SSO-H, set USE HTTP to
'On'.
To change the SSO-H user authentication system to
Domain Authentication, Domain Authentication +Local
Device Authentication, or Local Device Authentication,
set USE HTTP to 'On'.
To use the Remote UI, set USE HTTP to 'On'.
Set Use HTTP to 'On' if HTTP is required for MEAP
functions and MEAP applications. To use HTTP for
functions other than MEAP (e.g., the Remote UI), set
Use HTTP in Network Settings (from the Additional
Functions screen) to 'On'. (See the Network Guide.)
If you set Use HTTP in System Settings (from the
Additional Functions screen) to 'On', the port number
for MEAP functions and MEAP applications is
automatically set to '8000'.
1. Press → [System Settings] → [MEAP Settings] → [Use HTTP].
2. Select [On] or [Off].
Details of each item are shown below.
[On]: An HTTP server is used.
[Off]: An HTTP server is not used.
●
If you select [On]:
●
If you select [Off]:
If you select [On]:
Acesst 1.0 6251194