Specifications

1
Before You Start Using This Machine
How to Turn ON the Main Power 1-25
The screen below is displayed when the machine is ready to scan.
Once the message <Reservation copies can be made.> appears on the touch panel display, you can
specify settings, and copying or printing begins automatically as soon as the machine finishes warming up.
(See the Copying and Mail Box Guide.)
In the case above, the standard settings are selected.
The standard copy settings are:
Copy
Ratio:
1:1 (100%)
Paper
Selection:
Auto Paper Selection
Copy
Exposure:
Automatic Exposure Adjustment
Copy
Quantity:
1
Copy
Function:
1 1-sided copy
The standard settings for each function of the machine (Copy, Mail Box, Send, and Fax) are already set at
the factory, but you can change them to suit your needs. (See the Copying and Mail Box Guide and the
Sending and Facsimile Guide.)
You can select which functions to display on the Basic Features screen when turning ON the main power,
according to the Additional Functions settings. (See "Additional Functions(p.5-1).")
If you press [ → ] on the Basic Features screen right after the machine is activated, the screen will be
blank. Wait for a moment, and then press [ → ] again.
If a Macintosh, which has been shut down, is connected to the machine via a USB cable, when you turn
the machine ON, the Macintosh may also turn ON. In this case, disconnect the Macintosh from the
machine. (You may also be able to solve this problem by using a USB hub between the machine and the
Macintosh).
Acesst 1.0 6251194