Specifications

6
Security
Changing the Password and Page Limit 6-13
Press [Password] → enter the desired password using - (numeric keys).
Press [Confirm] → enter the same number to confirm the password using -
(numeric keys) → press [OK].
You cannot store a password with only zeros as the number, such as <0000000>. If you
enter a number that begins with zeros, the leading zeros are ignored.
Example: If <02> or <002> is entered, <0000002> is stored.
If you make a mistake when entering the password, press to clear the password → enter the
correct password.
You cannot change the Department ID.
If Use Asterisks to Enter Access No./Passwords in System Settings (from the Additional
Functions screen) is set to 'Off', passwords you enter are not displayed as asterisks (********). (See
"Setting the Display Method When Entering a Password(p.6-80).")
5. If you want to change or set a pag e limi t restriction, press [Turn Limits
On/Off and Set Page Limits].
6. Change the page limit restriction, if necessary.
Press [On] under the desired function(s).
Press [ ] (Page Limit) next to [On]/[Off] of the desired function(s) → enter the
page limit restriction using - (numeric keys).
Press [OK] → [OK].
If you do not want to set a page limit restriction for a function, press [Off] under the desired
function's name.
If you make a mistake when entering a number, press to clear the number → enter the correct
number.
You can set the page limit from 0 to 999,999 pages. Once a page limit is reached, copying, scanning, or
printing is not possible.
The page limit refers to the number of printed surfaces. Therefore, a two-sided print is counted as two
pages.
Acesst 1.0 6251194