Specifications

5
Additional Functions
Adjusting the Secure Watermark Mode Settings 5-99
Press [Latent String Density] → adjust the density using [-] or [+].
If you changed [Standard Value Settings], adjust [Latent String Density] so that the density of the inner
square set in [Standard Value Settings] for the standard value sample print gets closer.
To set a text density that differs from the most even secure watermark image in the standard value sample
print, it is necessary to adjust [Latent String Density] to a density close to the text density.
If you increase the value for [Latent String Density], the background gets denser, and if you decrease the
value, the background gets lighter. When [White Letters on Colored Backgnd] is not selected, if you
increase the value for [Latent String Density], the text gets denser, and if you decrease the value, the text
gets lighter.
7. If you changed [Standard Value Settings] and [Latent String Density],
repeat steps 3 to 6 to adjust [Relative Contrast Value].
If you did not change the settings, proceed to step 8.
8. Press [OK].
The contents of the settings changed in [Character/Background Contrast Adjustment] are
retained until the next time the settings are changed.
Acesst 1.0 6251194