Specifications

5
Additional Functions
5-98 Adjusting the Secure Watermark Mode Settings
If you want to adjust the density of the text:
Press [Standard Value Settings] → [Sample Print].
Select the paper to use for the sample print → press [Start Print].
A standard value sample print is output.
Refer to the print result and set the standard value indicated for the image
which has the most even contrast for the inner and outer squares using [-] or
[+].
If you increase the value for [Standard Value Settings], the text gets denser, and if you decrease the value,
the text gets lighter. When [White Letters on Colored Backgnd] is not selected, if you increase the value for
[Standard Value Settings], the background gets denser, and if you decrease the value, the background
gets lighter.
When changing the adjustment area on the sample print for the relative contrast, specify settings for
[Standard Value Settings].
If you want to adjust the density of the background (latent image):
Acesst 1.0 6251194