Specifications

5
Additional Functions
5-90 Creep (Displacement) Correction Adjustment
Creep (Displacement) Correction Adjustment
This mode enables you to adjust the displacement of pages that occurs between the outermost and
centre page when the Booklet mode is set.
1. Press → [Adjustment/Cleaning ] → [Creep (Displacement) Correction
Adjustment].
2. Select the desired paper type → press [Adjust].
3. Press [ ] or [ ] to adjust the correction width → press [OK].
To enter values in inches, press [Inch].
Acesst 1.0 6251194