Specifications

5
Additional Functions
5-88 Saddle Stitch Staple Repositioning
Saddle Stitch Staple Repositioning
You can reposition the stapler of the saddle stitcher unit after clearing a staple jam, or after replacing
the staple cartridge. Saddle stitch staple repositioning works by feeding several sheets of paper into
the saddle stitcher unit and stapling them together.
Remark
If transparencies are loaded in a paper drawer, make
sure to pull out that paper drawer slightly so that
transparencies are not fed for the saddle stitch staple
repositioning procedure. Damage to the machine may
occur if transparencies are fed during this procedure.
Only use A3 or A4R paper for the saddle stitch staple
repositioning procedure.
Make sure to remove all output booklets from the
optional Booklet Tray before performing the
saddlestitch staple repositioning procedure.
Saddle stitch staple repositioning can be performed
only if the optional Saddle Finisher-AE2 is attached.
Paper that is required for the saddle stitch staple
repositioning procedure is automatically fed to
thesaddle stitcher unit by the machine.
1. Press → [Adjustment/Cleaning ] → [Saddle Stitcher Staple
Repositioning].
2. Press [Start].
Acesst 1.0 6251194