Specifications

5
Additional Functions
Clean the Original Scanning Area Prompt 5-75
Clean the Original Scanning Area Prompt
You can use the Cleaning Display for the Original Scanning Area mode to prompt you to clean the
scanning area when the machine detects streaks or stains. If the feeder is not clean, the machine will
scan and print dust and grime on the output. The Clean the Original Scanning Area Prompt appears
when originals are placed in the feeder.
Remark
[Cleaning Display for the Original Scanning Area]
appears only if the optional Feeder (DADF-U1)
(standard-equipped for the iR3245N/iR3235N/
iR3225N) is attached.
1. Press → [Common Settings] → [Cleaning Display for the Original
Scanning Area].
2. Select [On] or [Off] → press [OK].
Acesst 1.0 6251194