Specifications

5
Additional Functions
5-70 Inserting a Job Separation Sheet between Copy Sets
Inserting a Job Separation Sheet between Copy Sets
If you are using the Collate, Offset Collate, or Staple mode, you can insert blank pages from a
selected paper drawer to separate a specified number of copies.
Remark
If you are using the Do not Collate, Rotate Collate,
Group, Offset Group, Booklet, or Saddle Stitch mode,
job separation sheets cannot be inserted between
copy sets.
1. Press [Common Settings] [Job Separator between Copies].
2. Select [On] or [Off].
If you select [On]:
If you select [Off]:
If you select [On]:
Press [Paper Select] select the paper drawer containing the desired paper
size for the job separation sheet press [OK].
Use - (numeric keys) to specify the number of pages after which a job
separation sheet will be inserted.
Press [OK].
Acesst 1.0 6251194