Specifications

5
Additional Functions
5-58 Standard Paper for the Stack Bypass
Standard Paper for the Stack Bypass
You can set the paper size and type that the stack bypass uses beforehand. This setting is useful if
you always load the same paper size and type into the stack bypass.
If the Stack Bypass Standard Settings are stored when using the optional Fax function, you can also
use the stack bypass to receive faxes.
Remark
When printing on special types of paper, such as
heavy paper or transparencies, be sure to correctly set
the paper type, especially if you are using heavy paper.
If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the
fixing unit may become dirty and require a service
repair, or the paper could jam.
If you are using the stack bypass as a paper source for
the Copy, Mail Box, and Fax (Receive) functions,you
must select the stack bypass when specifying the
Drawer Eligibility for APS/ADS setting. (See "Auto
Paper Selection/Auto Drawer Switching(p.5-35).")
1. Press → [Common Settings] → [Stack Bypass Standard Settings].
2. Press [On] → [Store].
If you press [Off], proceed to step 5.
3. Select the desired paper size.
●
If you want to select a standard paper size:
●
If you want to select an irregular paper size:
●
If you want to select an envelope size:
If you want to select a standard paper size:
Acesst 1.0 6251194