Specifications

5
Additional Functions
5-46 Output Tray Designation
appears. If only the optional Super G3 FAX Board is installed, [Fax] appears.
If you want to use an output tray for only one function, select only that function.
If a certain tray reaches its stacking limit, the machine automatically uses another tray that is designated
for the same function. However, it is recommended that you only designate one tray for fax/I-fax
documents to prevent them from getting lost.
If the optional Finisher-S1 and Copy Tray-J1 are attached and the Staple mode is set, the sheets are
output to Tray A, regardless of the Tray Designation settings.
If the optional Finisher-S1 and Copy Tray-J1 are attached and the following paper is selected, the sheets
are output to trays other than the Copy Tray-J1, regardless of the Tray Designation settings: nonstandard,
envelopes, heavy paper, transparencies, labels, or tracing paper.
If the optional Inner 2 Way Tray-D1 and Copy Tray-J1 are attached and the following paper is selected, the
sheets are output to trays other than the Copy Tray-J1, even if the Copy Tray-J1 is specified as the
destination: nonstandard, envelopes, heavy paper, transparencies, labels, or tracing paper.
●
If you want to select the tray home position (when the optional Finisher-AE1, Saddle
Finisher-AE2, or Finisher-S1 and Additional Finisher Tray-B1 are attached):
If you want to select the tray home position (when the optional Finisher-AE1,
Saddle Finisher-AE2, or Finisher-S1 and Additiona l Finisher Tray-B1 are
attached):
Press the Tray Home Position drop-down list → select the tray home position
to be used while jobs are being processed.
Tray Home Position
[Tray A]: Tray A moves closer to the
output area.
[Tray B]: Tray B moves closer to the
output area.
[Off]: The tray home position is not
set. The output tray stops at
the position it is in when
printing finishes.
Acesst 1.0 6251194