Specifications

5
Additional Functions
Energy Consumption in the Sleep Mode 5-41
Energy Consumption in the Sleep Mode
You can set the amount of energy that the machine consumes when it is in the Sleep mode.
Remark
The machine may not enter the Sleep mode
completely, depending on the status and type of
installed MEAP applications (e.g., there still may be
applications running in the background consuming
power).
If there are less than 10 minutes remaining before a
Delayed Send job is to be sent, the machine will not
enter the Sleep mode completely.
If you are using a management application (such as
NetSpot Console) to view or manage the settings and
status of the machine via the network, the machine
may not enter the Sleep mode completely.
The machine will not enter the Sleep mode completely
when it is connected to a computer via a USB cable.
The machine may not enter the Sleep mode
completely in the following cases:
If <Ethernet Type> in [Ethernet Driver Settings] in
[Network Settings] (from the Additional Functions
screen) is set to '1000 Base-T'
If the IPSec Board is installed and <Use IPSec> in
[IPSec Settings] in [TCP/IP Settings] (from the
Additional Functions screen) is set to 'On'
If the Wireless LAN Board is installed
In some cases, the energy consumption level in the
Sleep mode is 'High' even when the energy
consumption level is set to 'Low' when:
A job is being processed (including a forwarding job,
report job, receive job, and sending a forwarding
done notice).
Any of the following settings are set from the
Additional Functions screen:
Report Settings
Settings Send The Daily Activity Report Time setting for the Activity
Report is set to 'On'.*
1
Fax The Daily Activity Report Time setting for the FAX Activity
Report is set to'On'.*
1
System Settings
Communications
Settings
Memory RX Inbox
Settings
Time limit for receiving fax documents in memory is set.*
1
Acesst 1.0 6251194