Specifications

5
Additional Functions
Default Display after Auto Clear 5-31
Default Display after Auto Clear
You can set whether the screen specified as the Initial Function is displayed after the Auto Clear
mode initiates.
Remark
The time necessary for the Auto Clear mode to initiate
can be set. (See "Auto Clear Time(p.5-83).")
1. Press → [Common Settings] → [Auto Clear Setting].
2. Select [Initial Function] or [Selected Function] → press [OK].
Details of each item are shown below.
[Initial
Function]:
The screen specified as the
initial function is displayed
after the Auto Clear mode
initiates. For example, if you
set the System Monitor screen
as the initial screen, and the
Auto Clear mode initiates
while a settings screen for the
Mail Box function is shown,
the display returns to the
System Monitor screen.
[Selected
Function]:
The display returns to the
main screen of the function
that was displayed before the
Auto Clear mode initiated. For
example, if you set the
System Monitor screen as the
initial screen, and the Auto
Clear mode initiates while a
Acesst 1.0 6251194