Specifications

4
Optional Equipment
Changing the Password and Page Limit 4-61
Press [Confirm] → enter the same number to confirm the password → press
[OK].
You cannot store a password with only zeros as the number, such as <0000000>. If you
enter a number that begins with zeros, the leading zeros are ignored.
Example: If <02> or <002> is entered, <0000002> is stored.
If you make a mistake when entering the password, press to clear the password.
You cannot change the Department ID.
If Use Asterisks to Enter Access No./Passwords in System Settings (from the Additional Functions screen)
is set to 'Off', passwords you enter are not displayed as asterisks (*******). (See "Security(p.6-1).")
5. If you want to change or set a pag e limi t restriction, press [Turn Limits
On/Off and Set Page Limits].
6. Set the page limit restriction.
Press [On] under the desired function(s).
To cancel setting a page limit restriction for a function, press [Off] under the desired
function's name.
<Total Print Limit> is the sum of <Copy Limit> and <Print Limit>.
Press [ ] (Page Limit) next to [On]/[Off] of the desired function(s) → enter the
page limitrestriction using - (numeric keys).
The machine stops sending a fax if the Scan Limit is reached while faxing a document either from memory
or directly to the recipient.
The machine stops scanning if a scan limit is reached while the machine is scanning originals that are
being fed from the optional feeder. (Those originals that were scanned before the limit is reached are not
added to the scan count.)
If you make a mistake when entering a number, press to clear the number.
You can set the page limit from 0 to 999,999 pages. Once the page limit is reached, copying, scanning, or
printing is not possible.
The page limit refers to the number of printed surfaces. Therefore, a two-sided print is counted as two
pages.
Acesst 1.0 6251194