Specifications

4
Optional Equipment
4-52 Card Reader-C1
Card Reader-C1
If the Card Reader-C1 is attached to the machine, you must insert a control card to operate it. The
Card Reader-C1 performs Department ID Management by using the control card.
Remark
If you are using a login service other than default
authentication, the Limit Functions mode will not be
available.
If SSO-H is set as the login service, you cannot use the
optional Card Reader-C1.
If the Basic Features screen does not appear on the
touch panel display when the control card is inserted,
make sure that:
The control card is inserted in the correct direction.
The control card is inserted as far as it can go.
An unusable control card is not inserted. (For
example, cards, which are damaged or cards
prohibited from use.)
Insert a usable control card correctly.
For instructions on turning the power ON, see "Before
You Start Using This Machine(p.1-1)."
If the Card Reader-C1 is attached, the types of cards
shown below can be used. An optical type card can
manage up to 200 departments, and a magnetic type
card can manage up to 1,000 departments.
Acesst 1.0 6251194