Specifications

4
Optional Equipment
Finishing Modes 4-45
Remark
The Saddle Stitch mode is available only if the Saddle
Finisher-AE2 is attached.
The maximum number of sheets that can be saddle
stitched is 15 (60 pages, 80 g/m
2
), including cover
sheets. To change the amount of pages that can be
saddle stitched, contact your local authorized Canon
dealer.
The paper sizes that can be saddle stitched are: A3 or
A4R.
The accuracy of folds created in the Saddle Stitch
mode may vary depending on the paper type and the
number of sheets.
Make sure to adjust the Booklet Tray guide to match
the size of the output paper before outputting saddle
stitched prints, as shown below.
A paper jam may occur if the Booklet Tray guide is not
adjusted to match the size of the output paper.
Hole Punch Mode
The Hole Punch mode punches two or three holes (depending on the paper size) in the printed
sheets.
The hole punched areas are shown in the illustration below.
Acesst 1.0 6251194