Specifications

4
Optional Equipment
4-42 Finishing Modes
Finishing Modes
The Finisher-AE1 and Saddle Finisher-AE2 are equipped with the following finishing modes.
Remark
Do not place anything other than output paper in the
trays of the finisher, as doing so may damage the
trays.
Do not place
anything under the
trays of the finisher,
as doing so may
damage the trays.
If the Collate or Group mode is set, the output trays
move downward as the stack of paper that is output
increases in quantity and thickness. Once an output
tray has reached its stacking limit, subsequent prints
are automatically delivered to the next available tray. If
all of the available trays have reached their stacking
limits, printing stops temporarily. Remove all of the
output paper from the trays. The trays move upward,
and printing resumes.
Collate Mode
The prints are automatically collated into sets arranged in page order. The collated print sets can be
shifted by pressing [Offset].
Group Mode
All prints of the same original page are grouped together. The grouped print sets can be shifted by
pressing [Offset].
Offset Mode
The print output is shifted alternately to the front and back of the tray, in a vertical (portrait)
orientation, or a horizontal (landscape) orientation, depending on the orientation of your originals. For
example, if you place A4R originals, the paper is output and shifted in the horizontal direction. If you
place A4 originals, the paper is output and shifted in the vertical direction.
Acesst 1.0 6251194