Specifications

4
Optional Equipment
Parts and Their Functions 4-41
Parts and Their Functions
1 Top Cover of the Finisher
Open this cover to remove jammed paper.
2 Top Cover of the Puncher Unit
Open this cover to remove jammed paper.
3 Front Cover of the Punch Waste Tray
Open this cover to remove punch waste or to
remove jammed paper.
4 Buffer Pass Unit-E2
Open the Buffer Pass Unit-E2 to remove
jammed paper.
5 Front Cover of the Finisher-AE1
Open this cover to replace the staple cartridge
in the stapler unit, or to clear a staple jam.
6 Front Cover of the Saddle Finisher-AE2
Open this cover to replace the staple cartridge,
remove jammed paper, or to clear a staple jam
in the stapler unit and saddle stitcher unit.
7 Booklet Tray (Saddle Finisher-AE2 Only)
Prints that are saddle stitched are output to
this tray.
8 Booklet Tray Guide (Saddle Finisher-AE2
Only)
Set this guide to match the size of the output
paper. (See "Finishing Modes(p.4-35).")
9 Lower Output Tray
Prints are output to this tray. You can set the
Tray Designation mode to designate this tray
for outputting prints when using certain
functions. (See "Additional Functions(p.5-1).")
10 Upper Output Tray
Prints are output to this tray. You can set the
Tray Designation mode to designate this tray
for outputting prints when using certain
functions. (See "Additional Functions(p.5-1).")
Acesst 1.0 6251194