Specifications

4
Optional Equipment
Finishing Modes 4-35
Finishing Modes
The Finisher-S1 is equipped with the following finishing modes.
Remark
If the Collate or Group mode is set, the output tray
moves downward as the stack of paper that is output
increases in quantity and thickness. Once the output
tray has reached its stacking limit, printing stops
temporarily. Remove all of the prints from the output
tray, and printing resumes.
Collate Mode
The prints are automatically collated into sets arranged in page order. The collated print sets can be
shifted by pressing [Offset].
Group Mode
All prints of the same original page are grouped together. The grouped print sets can be shifted by
pressing [Offset].
Offset Mode
The print output is shifted alternately to the front and back of the tray, in a vertical (portrait)
orientation, or a horizontal (landscape) orientation, depending on the orientation of your originals.
Remark
If you press [Offset] when either the Collate or Group
mode is set, each set of prints is shifted approximately
30 mm before it is delivered to the output tray.
Staple Mode
Acesst 1.0 6251194