Specifications

4
Optional Equipment
Finisher-S1/Puncher Unit-Q1/S1/T1 4-33
Finisher-S1/Puncher Unit-Q1/S1/T1
The Finisher-S1 is equipped with the following finishing modes: Collate, Group, Offset, and Staple.
(See "Finishing Modes(p.4-35).")
The Puncher Unit-Q1/S1/T1 is equipped with the Hole Punch mode.
If the optional Copy Tray-J1 is attached to the right side of the machine, and the optional Additional
Finisher Tray-B1 is attached to the Finisher-S1, prints can be delivered to three different locations.
Remark
The Finisher-S1 cannot be attached with the optional
Inner 2 Way Tray-D1.
Acesst 1.0 6251194