Specifications

4
Optional Equipment
4-4 Optional Equipment
1 Platen Cover Type M
The Platen Cover Type M secures the
originals placed on the platen glass.
This option is not available for the iR3245N/
iR3235N/iR3225N.
2 Feeder (DADF-U1)
Originals placed in the feeder are
automatically fed sheet by sheet onto the
platen glass for scanning. The feeder also
automatically turns over two-sided originals to
make one or two-sided copies.
The Feeder (DADF-U1) is standard-equipped
for the iR3245N/iR3235N/iR3225N.
3 Card Reader-C1
The Card Reader-C1 enables Department ID
Management to be performed automatically.
4 Copy Tray-J1
The Copy Tray-J1 provides an additional
paper output tray.
5 Paper Deck-Q1
The Paper Deck-Q1 provides an additional
source of paper for printing jobs.
The Paper Deck-Q1 holds up to 2,700 sheets
of paper (80 g/m
2
).
6 Cassette Feeding Unit-Y3
The Cassette Feeding Unit-Y3 provides two
additional sources of paper for printing jobs.
Each paper drawer holds up to 550 sheets of
paper (80 g/m
2
).
7 Inner 2 Way Tray-D1
The Inner 2 Way Tray-D1 is equipped with the
following features: Collate, Group, and Rotate.
8 Envelope Feeder Attachment-C2
The Envelope Feeder Attachment-C2 can only
be attached to Paper Drawer 1, and holds only
envelopes.
9 Puncher Unit-Q1/S1/T1
The Puncher Unit-Q1/S1/T1 can be attached
to the optional Finisher-S1, and is equipped
with the Hole Punch mode.
10 Finisher-S1
The Finisher-S1 is equipped with the following
modes: Collate, Group, Offset, and Staple
(Corner).
11 Additional Finisher Tray-B1
The Additional Finisher Tray-B1 can be
attached to the optional Finisher-S1 to provide
an additional paper output tray.
12 Buffer Pass Unit-E2
The Buffer Pass Unit-E2 is required to attach
the Finisher-AE1 or Saddle Finisher-AE2 to
the main unit.
13 Puncher Unit-L1/N1/P1
The Puncher Unit-L1/N1/P1 can be attached
to the optional Finisher-AE1 or Saddle
Finisher-AE2, and is equipped with the Hole
Punch mode.
14 Staple Cartridge-D2/D3
The Staple Cartridge-D2/D3 can be attached
to the optional Saddle Finisher-AE2 for saddle
stitching.
15 Staple-J1
The Staple-J1 can be attached to the optional
finisher for stapling (Corner and Double).
16 Saddle Finisher-AE2
The Saddle Finisher-AE2 is equipped with the
following modes: Collate, Group, Offset, and
Staple (Corner, Double, and Saddle Stitch).
17 Finisher-AE1
The Finisher-AE1 is equipped with the
following modes: Collate, Group, Offset, and
Staple (Corner and Double).
Acesst 1.0 6251194