Specifications

3
Basic Operations
Adjusting the Alarm and Monitor Volume 3-47
Adjusting the Alarm and Monitor Volume
You can set the volume for the alarm and monitor tones that this machine sounds during a fax
transmission.
Remark
This mode is available only if the optional Super G3
FAX Board is installed.
The alarm tone sounds when sending or receiving is
cancelled.
The monitor tone sounds when it connects to the
recipient's fax machine.
1. Press on the control panel.
2. Select [ ] or [ ] to set the Alarm Volume and Monitor Volume →
press [OK].
You can set the volume to any level on a scale of 0 to 9.
If you set the volume all the way to the left, the volume is muted and no tone will sound.
Acesst 1.0 6251194