Specifications

3
Basic Operations
Making Prints Using the Stack Bypass 3-35
Place the envelopes on a clean , level surface, and press all the way around the
envelopes by hand, in the direction of the arrows, to remove any curls. Repeat
this step five times for each set of five envelopes.
If you are using ISO-B5, ISO-C5, COM10 No.10, and Monarch: Catalog Glove No.8, or DL
envelopes, hold down the four corners of the envelopes firmly, so that they and the sealed or
glued portion stay flat.
If you are using Yougata 4 envelopes, load the envelopes without folding them.
If you use envelopes that have glue attached to their flaps, the glue may melt due to the heat and pressure
of the fixing unit.
Take particular care to spread the envelopes out in the direction that they will be fed.
Do not print on the backside of the envelopes (the side with the flap).
If the envelopes become filled with air, flatten them by hand before loading them into the stack bypass.
Acesst 1.0 6251194