Specifications

3
Basic Operations
3-34 Making Prints Using the Stack Bypass
bypass, as shown in the illustration below.
If the paper retaining lever is not set securely, a paper jam may occur, or paper may be fed from a paper
drawer instead of the stack bypass.
When loading paper into the stack bypass, align the paper stack neatly between the slide guides. If the
paper is not loaded correctly, a paper jam may occur.
If you are printing on heavyweight paper or envelopes using the stack bypass, and find that the paper or
envelopes are not being fed smoothly or evenly through the stack bypass, remove the paper or envelopes,
curl the feeding edges upward approximately 3 mm, and then reload the paper or envelopes. Curling the
feeding edges enables the rollers to grip the paper or envelopesas they are fed into the stack bypass.
If there are instructions on the paper package about which side of the paper to load, follow those
instructions.
When the paper is loaded into the stack bypass, the side facing down is the one printed on.
If problems, such as poor print quality or paper jams occur, try turning the paper stack over and reload it.
●
If you are loading envelopes into the stack bypass:
If you are loading envelopes into the stack bypass:
Take five envelopes, loosen them as shown, and then stack them together.
Repeat this step five times for each set of five envelopes.
Acesst 1.0 6251194