Specifications

3
Basic Operations
3-24 Platen Glass
The surface of the original that you want to copy must be placed face down. Align the top
edge of your original with the back edge of the platen glass (by the arrow in the top left
corner).
Place books and other bound originals on the platen glass in the same way.
When you are enlarging an A4 or A5 original onto A3 paper, place the original horizontally on the platen
glass, and align it with the A4R or A5R marks.
3. Gently close the feeder/platen cover.
Close the feeder/platen cover gently to avoid catching your hands, as this may result in personal injury.
Do not press down hard on the feeder/platen cover when using the platen glass to make copies of thick
books. Doing so may damage the platen glass and result in personal injury.
Be aware that the light emitted from the platen glass may be very bright when closing the feeder/platen
cover.
If you are placing the original on the platen glass, the size of the original is detected after the feeder/platen
cover is closed. Be sure to close the feeder/platen cover before copying.
Remove the original from the platen glass when scanning is complete.
Acesst 1.0 6251194