Specifications

CRP-C0036-01

and CEM.

More specific, the evaluation facility examined “Canon iR4570/iR3570/iR2870/iR2270

Series iR Security Kit-B2 V2 Security Target Version 1.03” as the basis design of

security functions for the TOE (hereinafter referred to as “the ST”)[1], the evaluation

deliverables in relation to development of the TOE and the development,

manufacturing and shipping sites of the TOE. The evaluation facility evaluated if the

TOE is satisfied both Annex C of CC Part 1 (either of [5], [8], [11] or [14]) and

Functional Requirements of CC Part 2 (either of [6], [9], [12] or [15]) and also

evaluated if the development, manufacturing and shipping environments for the TOE

is also satisfied with Assurance Requirements of CC Part 3 (either of [7], [10], [13] or

[16]) as its rationale. Such evaluation procedure and its result are presented in “Canon

iR4570/iR3570/iR2870/iR2270 Series iR Security Kit-B2 (Japanese version) iR Security

Kit-B2 (International version) Evaluation Technical Report” (hereinafter referred to as

“the Evaluation Technical Report”)[22]. Further, evaluation methodology should

comply with the CEM Part 2 (either of [17], [18] or [19]). In addition, the each part of

CC and CEM shall include contents of interpretations (either of [20] or [21]).

1.4 Certification

The Certification Body verifies the Evaluation Technical Report and Observation

Report prepared by the evaluation facility and evaluation evidence materials, and

confirmed that the TOE evaluation is conducted in accordance with the prescribed

procedure. Certification review is also prepared for those concerns found in the

certification process. Evaluation is completed with the Evaluation Technical Report

dated September, 2005 submitted by the evaluation facility and those problems

pointed out by the Certification Body are fully resolved and confirmed that the TOE

evaluation is appropriately conducted in accordance with CC and CEM. The

Certification Body prepared this Certification Report based on the Evaluation

Technical Report submitted by the evaluation facility and concluded fully certification

activities.

1.5 Overview of Report

1.5.1 PP Conformance

There is no PP to be conformed.

1.5.2 EAL

Evaluation Assurance Level of TOE defined by this ST is EAL3 conformance.

1.5.3 SOF

This ST claims “SOF-basic” as its minimum strength of function.

This claim is appropriate, because the TOE is a software program for use on the

multifunction product that is a general commercial product intended for use in an

office environment.