Service manual

Chapter 2
2-22
F-2-62
Route the repeating wire B [1] as shown below.
F-2-63
12) Using the supplied binding screw (M4x6), secure the card reader cover [2].
F-2-64
13) Affix the two supplied harness covers (bases) at the right rear of the machine with it aligned with the bottom line of the reader.
F-2-65
14) Affix the supplied harness cover (base) [1] at the back of the machine with it aligned with the bottom line of the reader.
[1]
[1]
[1]
[2]
[1]