Service manual

Chapter 2
2-21
F-2-58
8) Secure the repeating harness B [1] with the wire saddle [2].
F-2-59
9) Remove the two blind seals [1] from the reader left cover.
F-2-60
10) Using the two supplied TP screws (M4x16), attach the card reader to the reader.
When tightening the screws, take care not to damage the repeating harness B.
F-2-61
11) Slide the card reader cover [1] to attach it to the card reader mount.
[2]
[3]
[4]
[1]
[5]
[2]
[1]
[1]
[1]