Service manual

Chapter 2
2-14
2.3.2 Checking the Network Connection
0012-7020
iR2016i / iR2020i
If the machine supports a network feature, check the network connection fol-
lowing the procedure below.
1) Press the following keys to display the service mode screen:
> 2 Key > 8 Key >
2) Select "# REPORT" using or , and then press the OK.
3) Select "REPORT OUTPUT" using or , and then press the OK.
4) Select "SPEC LIST" using or , and then press the OK.
5) When "SPEC REPORT" is displayed, check that "BDL-IMAGE" is set to
ON.
MEMO:
"SPEC REPORT"
BDL-IMAGE (1200) must be set to ON.
6) Contact the system administrator of the customer to make network
settings.