Service manual

Chapter 2
2-5
2.2 Unpacking and Installation
2.2.1 Unpacking and Removing the Packaging Materials
0011-1070
iR2016J / iR2016 / iR2020 /
1) Unpack the machine and remove vinyl, cushioning materials, and tape.
2) Hold the handles [1] of the machine together with one or more persons and
take it out.
The maximum weight of this machine is approximately 46kg. Two or more
persons are required to lift the machine.
F-2-7
2.2.2 Unpacking and Removing the Packaging Materials
0012-6449
iR2016i / iR2020i
1) Unpack the machine and remove vinyl, cushioning materials, and tape.
2) Hold the handles [1] of the machine together with one or more persons and
take it out.
The maximum weight of this machine is approximately 52kg. Two or more
persons are required to lift the machine.
F-2-8
2.2.3 Installing the Drum Unit
0011-1071
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the front cover [1] of the iR body.
F-2-9
2) Turn the developer pressure release lever [1] clockwise, and then open the
left door [2] until it stops.
The left door must be opened fully to prevent the drum from being damaged
while it is inserted into the drum unit.
[1]
[1]
[1]
[1]
[1]