Service manual

Chapter 1
1-25
*: Factory default
1.2.3.4 Timer Settings (iR2020i/iR2016i)
0012-6020
iR2016i / iR2020i
T-1-3
1.2.3.5 FAX Settings (iR2020/iR2020J/iR2016/iR2016J)
0011-1224
iR2016J / iR2016 / iR2020 /
*: Factory default
1.2.3.6 Adjustment/Cleaning (iR2020i/iR2016i)
0012-6022
iR2016i / iR2020i
T-1-4
1.2.3.7 Address Book Set. (iR2020/iR2020J/iR2016/iR2016J)
0011-1225
iR2016J / iR2016 / iR2020 /
*: Factory default
Item Settings(*1 Indicates the default setting.)
Date & Time Settings Date and Time Setting (12 digit number)
Time Zone Settings:
GMT -12:00 to GMT +12:00;
GMT -03:00*1
Daylight Saving Time Settings: On, Off*1
Auto Sleep Time On*1 3 to 30 minutes; 5*1
Off
Auto Clear Time 0 (Off) to 9 minutes, in one minute increments; 2 min.*1
Additional Functions Available Settings
1. USER SETTINGS UNIT TELEPHONE #
UNIT NAME
TX TERMINAL ID: ON (PRINTING POSITION: OUTSIDE IMAGE(*), INSIDE IMAGE, TELEPHONE #
MARK: FAX(*), TEL), OFF
SCANNING DENSITY: -LT - DK+ 9 steps (5(*))
TEL LINE TYPE: TOUCH TONE(*), ROTARY PULSE
VOLUME CONTROL: MONITOR VOL. CTRL (0 - 3 (1(*)))
STANDARD SETTINGS: SCAN DENSITY (STANDARD(*), DK, LT), IMAGE QUALITY (STANDARD(*),
FINE, PHOTO, SUPER FINE, ULTRA FINE), DIRECT TX (OFF(*), ON), STAMP DOCUMENT (OFF(*), ON)
INIT. FAX STD SET: OFF(*), ON
2. TX SETTINGS ECM TX: ON(*), OFF
PAUSE TIME: 1 to 15 (4(*)) SEC.
AUTO REDIAL: ON (REDIAL TIMES, REDIAL INTERVAL, TX ERROR REDIAL)(*), OFF
TIME OUT: ON(*), OFF
STAMP DOCUMENT: DIRECT&MEMORY TX(*), DIRECT TX
DIALING LINE CHCK: ON(*), OFF
ROTATE TX: ON(*), OFF
3. RX SETTINGS ECM RX: ON(*), OFF
4. PRINTER SETTINGS SELECT DRAWER: SWITCH A (ON(*), OFF), SWITCH B (ON(*), OFF), SWITCH C (ON(*), OFF), SWITCH
D (ON(*), OFF)
RECEIVE REDUCTION: ON (RECEIVE REDUCTION, REDUCE DIRECTION)(*), OFF
TWO-SIDED PRINT: OFF(*), ON
CONT. PRINTING: RX TO MEMORY(*), KEEP PRINTING
Item Settings(*1 Indicates the default setting.)
Transfer Roller Cleaning Press [Start]
Fixing Unit Cleaning Press [Cleaning Sheet Print]
Feeder Cleaning Press [Start]
Special Mode M Normal*1, Low, High
Special Mode N On, Off*1
Special Mode O Stack Bypass: On, Off*1
Drawer: On, Off*1
Special Mode P On, Off*1
Bond Special Fixing Mode On, Off*1
Special Mode S Speed Priority 1, Speed Priority 2, Off*1
Auto Adjustment for Dirty Feeder On*1, Off
Additional Functions Available Settings
1. 1-TOUCH SPD DIAL Up to 60 destinations can be registered: TEL NUMBER ENTRY, NAME, OPTIONAL SETTING
2. CODED SPD DIAL Up to 140 destinations can be registered: TEL NUMBER ENTRY, NAME, OPTIONAL SETTING
3. GROUP DIAL Up to 199 destinations can be registered: TEL NUMBER ENTRY, NAME