Service manual

Chapter 14
14-7
#ACC
Item Initial setting Range of setting Function
CARD 0 0 - 99999 Card reader installation setting
CC-SPSW 0 0 or 1 Control card I/F support setting
COIN 0 0 or 1 Coin vendor change setting
CONTROL 0 0 or 1 Pinter output control setting at the time of support of control card I/F
#COUNTER
Item Function
TOTAL total counter
PICK_UP pickup-related counter
FEEDER feeder counter
JAM jam-related counter
MISC other counter
DRBL-1 durables counter
#LMS*1
Item Function
INACTIVE Not used
ERACE Not used
*1 Only for the iR2020i/iR2016i model.
#REPORT
Setting Function
#REPORT SW Not used
#REPORT OUTPUT SERVICE DATA LIST Output of service data list
SYSTEM DATA LIST Output of system data list
SYSTEM DUMP LIST Output of system dump list
COUNTER LIST Output of counter list
ERROR LOG LIST Output of error log list
SPEC LIST Output of spec list
SERVICE LABEL Output of service label
#REPORT NUMERIC Not used
#DOWNLOAD Download mode
#CLEAR
Item Level2 Function
TEL & USER DATA Use it to clear all areas under user registration/setting.
SERVICE DATA Use it to clear the counters (numerator), date, and start
data form the system dump list.
COUNTER Use it to clear the maintenance/parts counter data and each mode counter data.
SOFT-CNT Not used.
TYPE Use it to clear the user data and the service data by specified settings.
HST ACTIVITY Use it to clear the contents of the communications control
report.
ACCOUNT Use it to clear each print history.
JAM Use it to clear the contents of the jam history.
ERR Use it to clear the contents of the error (E code) history.
ALARM Use it to clear the contents of the alarm history.
CARD Use it to clear the control cars error data.
ERR E355 Not used.
E719 Use it to clear the management information at the time of card reader removal.
PWD Use it to clear the system administrator's password.
FILE SYSTEM*1 Delete unnecessary language files in the USB memory.
FORMAT*1 USB MEMORY Format the USB memory. (This mode is used when the USB memory error is damaged and
E744 occurs.)
LICENSE DRIVE Not used.
ALL Use it to clear all settings/registration data except the
counter (denominator, numerator).
*1 Only for the iR2020i/iR2016 model.
#ERROR DISPLAY*1 Display the service error code.