Service manual

Chapter 9
9-19
F-9-94
6) Remove the 10 screws [1], and then detach the IP cover [2].
F-9-95
9.4.11.7 Removing the IP Cover
0011-0625
iR2016J /
1) Release SOFT ID cable [1] from the cable clamp [2].
F-9-96
2) Release a claw [1] of cable guide and detach the cable guide [2] upward.
F-9-97
3) Open a core [1].
F-9-98
4) Remove the two screws [1], and then detach the flexible cable guide [2].
F-9-99
5) Remove the 10 screws [1], and then detach the IP cover [2].
F-9-100
9.4.11.8 Removing the Image Processor PCB Mount
0011-0626
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
[1]
[2]
[1]
[1]
[1]
[2]
[1]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[1]
[1]
[2]