Service manual

Chapter 9
9-18
F-9-87
9.4.11.4 Removing the SDRAM
0011-0622
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Release two lock levers [1] in the direction of arrow [A] and remove
SDRAM [2].
F-9-88
9.4.11.5 Removing the LAN Cover
0011-0623
iR2016 / iR2020 / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the LAN cover [2].
F-9-89
9.4.11.6 Removing the IP Cover
0011-0624
iR2016 / iR2020 / iR2016i / iR2020i
1) Remove a connector [1] of IP-LAN cable and a cable clamp [2].
F-9-90
2) Release SOFT ID cable [1] from the cable clamp [2].
F-9-91
3) Release a claw [1] of cable guide and detach the cable guide [2] upward.
F-9-92
4) Open a core [1].
F-9-93
5) Remove the two screws [1], and then detach the flexible cable guide [2].
[1]
[2]
[1] [2]
[A]
[A]
[1]
[2]
[1]
[1]
[2]
[1]
[2]
[1]
[2]
[1]