Service manual

Chapter 9
9-8
F-9-26
9.4.2.5 Removing the Fixing Unit
0011-0613
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the two screws [1], and then detach the inner cover [2] at the
upper front.
F-9-27
2) Remove the screw [1], and then detach the heater harness cover [2].
Disconnect the connector [3].
F-9-28
3) Disconnect the two connectors [1], and then release the fixing unit harness
from the wire saddle [2].
F-9-29
4) Raise the delivery upper guide [1]. Remove the three screws [2], and then
remove the fixing unit [3].
F-9-30
9.4.2.6 Removing the SDRAM
0011-0614
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the RAM cover [2].
F-9-31
9.4.2.7 Removing the SDRAM
0011-0615
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Release two lock levers [1] in the direction of arrow [A] and remove
SDRAM [2].
[1]
[2]
[1]
[1]
[3]
[2]
[1]
[2]
[1]
[2] [3] [2]
[1]
[1]
[2]