Service manual

Chapter 7
7-12
F-7-28
7.5.5.3 Removing the Cassette Paper Presence/Absence
Sensor
0011-0661
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Disconnect the connector [1], and then remove the cassette paper pres-
ence/absence sensor [2].
F-7-29
7.5.6 Cassette Pickup Solenoid
7.5.6.1 Removing the Lower-left Cover
0012-6068
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Detach the lower-left cover [2] by opening the rear support [1] with a
slightly strong force applied in the direction of the arrow.
F-7-30
7.5.6.2 Removing the Cassette Pickup Assembly
0011-2939
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Detach the cassette rear cover. (2 screws)
2) Remove the five screws [1] and one screw with toothed washer [2].
3) Disconnect the three connectors [3], and then remove the cassette pickup
assembly [4].
F-7-31
Install the cassette pickup assembly with the ground plate [1] outside the
side plate.
F-7-32
7.5.6.3 Removing the Cassette Pickup Solenoid
0011-0659
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the harness [1] from the two wire saddles [2].
2) Remove the screw [3], and then remove the cassette pickup solenoid [4].
F-7-33
7.5.7 Manual Pickup Roller
7.5.7.1 Removing the Drum Unit
0012-6071
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the front cover [1].
2) Turn the developer pressure release lever [2] clockwise, and then open the
left door [3].
3) Draw out the drum unit [4].
[
1]
[1]
[2]
[2]
[1]
[1]
[2]
[3]
[1]
[3]
[4]
[
1]
[4][3][2][1]