Service manual

Chapter 2
2-28
F-2-78
6) Using a nipper or the like, cut out the face plate [2] (used to install a heater switch) on the lower-right cover [1].
F-2-79
2.6.3 Installing the Heater PCB
0011-3365
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Install the heater PCB unit [2] using the two supplied TP screws (M3x8) [1].
2) Install the heater switch [3] on the right side panel.
Install the heater switch with the OFF position on the left and the ON position on the right just like the main power switch.