User`s guide

List of Error Messages

3-7

Troubleshooting

# 037

Cause Documents could not be received because there was insufficient memory available.

Remedy Erase unwanted documents and documents with errors from memory in order to increase the

amount of available memory. (See “Checking/Changing the Send/Receive Status,” in the

Sending and Facsimile Guide.)

# 701

Cause The specified Department ID does not exist, or the password has changed.

Remedy Enter the correct Department ID or password using - (numeric keys) on the control

panel, and try again. (See “Entering the Department ID and Password,” in the Reference

Guide.)

# 749

Cause You could not execute the job because a service call message is being displayed.

Remedy Turn the main power OFF, wait for three or more seconds, and turn the main power back ON.

If the machine still does not work normally, turn the main power OFF, disconnect the

machine, and contact your local authorized Canon dealer.

# 816

Cause You cannot print because the set page limit total has been reached.

Remedy Contact your System Manager.

# 852

Cause An error occurred because the main power switch was turned OFF while a job was being

processed.

Remedy Check to see if the main power switch is turned ON. Try processing the job again, if

necessary.

Downloaded from ManualsPrinter.com Manuals