User`s guide

Clearing Paper Jams

3-3

Troubleshooting

Inspect all paper jam locations indicated on the touch panel display, and

remove any jammed paper.

See the appropriate pages below for instructions on finding and removing jammed paper. Or, you can

follow the instructions on the touch panel display.

If jammed paper tears while it is being removed, be sure to remove any remaining pieces from inside

the machine.

IMPORTANT

•

If the machine’s power is turned OFF when there is a paper jam, detection of paper jams in the paper

drawers is not possible after the power is turned back ON. Clear paper jams without turning the power

OFF.

•

If a paper jam occurs in the feeder, you cannot continue operating the machine. Follow the directions on

the touch panel display to clear the paper jam. (See “Feeder (DADF-P2),” in the Reference Guide.)

NOTE

•

Some areas that are shown to have paper jams may not actually have paper jams. However, always

check all locations indicated on the touch panel display in the order that is given.

•

When paper is jammed in several locations, the following image with the black circles appears on the

screen.

❑ See the instructions on the following section.

a Stack Bypass (See “Stack Bypass,” in the Reference Guide.)/

Fixing Unit (See “Fixing Unit (Inside the Main Unit),” in the

Reference Guide.)

b Paper Drawer 1 (See “Paper Drawer 1,” in the Reference Guide.)

c Paper Drawer 2 (See “Paper Drawers 2, 3, and 4,” in the

Reference Guide.)

For the iR2018i, the paper drawer 2 can be used when the

optional Cassette Feeding Module-P1 is attached to the machine.

Downloaded from ManualsPrinter.com Manuals