Specifications

Photo Stickers PS-101
Photo Stickers PS-101 is a peel-and-stick sheet that allows you to make your original stickers using your favorite
photo. It is a glossy sheet and is highly resistant to water. On each sheet, you can print 16 photo stickers with
excellent printing quality. This media is available in the size of 4" x 6" / 101.6 x 152.4 mm.
Loading
Load each sheet with the glossy side up. Printing on the back side can stain the inside of the printer or
your clothes.
Place the sheet in portrait in such a manner that the top margin is larger than the bottom margin. For more
information, refer to the instructions on the back of the sheet package.
Load one sheet at a time.
If a sheet is curled, uncurl it before loading.
Do not use a sheet from which stickers are going to come off or you have peeled off stickers.
Set the Paper Thickness Lever (gray) to the right.
Printer Driver Settings
Media Type: Photo Paper Plus Glossy
Page Size: 4" x 6" / 101.6 x 152.4 mm
Handling of Printed Output
Remove each sheet as soon as it is printed.
Note When printing a Photo Stickers (PS101) sheet, it is recommended using the PhotoRecord (v2.2 or later)
provided with the printer. It is easily printed by selecting "16-Sticker Label" from "Perforated Paper"
menu in the "Select Printer & Album Type" of the PhotoRecord (Windows only).