Specifications

Resetting the Ink Counter
When an ink tank is replaced, the ink counter must be reset. The low ink
warning is only displayed properly if the ink counter is reset.
Message Prompting Confirmation of Ink Tank
Replacement
If an ink tank is removed, the printer will output a message prompting you to
confirm replacement of the ink tank at the start of the next print job.
When an ink tank has been replaced, follow the procedure below to reset the
ink counter. The low ink warning is only displayed properly if the ink
counter is reset.
Important If infrared communication is performed in Windows XP
or Windows 2000, the printer will not output the
message asking for confirmation of ink tank
replacement.
Reset the ink counter from the printer driver when you
replace the ink tank.
1 Check the message, and click Yes.
Note Mistakenly clicking No instead, will prevent the low ink
warning from functioning properly. If this happens, be
sure to open the driver's Properties dialog box and
manually reset the ink tank counter in the Maintenance
tab.
See Resetting the Ink Counter in Printer Properties dialog box