Specifications

Traveling Abroad with the Printer
Before traveling abroad with the printer, ensure that the following notes.
About Universal AC Adapter and Power Cord
The Universal AC Adapter can be used abroad to power the printer from power supplies ranging from AC
100 V to 240 V. However, the specification of the Power Cord differs for each country, please purchase the
Power Cord suitable for the specification of each country.
For details, call for Canon service representative.
*1 Power Cord
*2 Universal AC Adapter
Universal AC Adapter is not dependent on the specification of each country. It is common also
abroad and can use.
Fill Out the CIWS Card
Fill out the CIWS Card (Canon International Warranty System) with the date of purchase and the name of
where the printer was purchased. Carry this warranty card with you when you travel, so you can request
repairs or servicing of the printer at your destination. For details, refer to the CIWS card.
The cautions when carrying printer
Pack up firmly in the case of carrying bag. For details, refer to Transporting Printer.
Do not place any heavy object on the printer.
Strong vibration and shock could cause the printer's malfunction or leak of ink.
When you remove the Power Cord, check that the POWER lamp is off completely. If the Power Cord is
pulled out while the POWER lamp is on or flashing, it will become the failure.
Note X-ray and any other baggage inspection devices have no adverse effect on this printer.