Service manual

9
3-2. Service Call Errors (by Cyclic Blinking in Orange (Alarm LED) and Green (Power LED), or
Alarm LED Lit in Orange)
Cycles of blinking in
orange and green
Error [Error code]
Solution
(Replacement of listed parts, which are likely to be
faulty)
2 times Carriage error [5100]
3 times Line feed error [6000]
4 times Purge cam sensor error [5C00]
5 times ASF (cam) sensor error [5700]
6 times Internal temperature error [5400]
7 times Ink absorber full [5B00 / 5B01 (Japan)]
8 times Print head temperature rise error [5200] - Print head (QY6-0061)
9 times EEPROM / NVRAM error [6800]
10 times VH monitor error [B200]
- Print head (QY6-0061)
11 times Carriage lift mechanism error [5110]
12 times AP position error [6A00]
13 times Paper feed position error [6B00]
14 times Paper feed cam sensor error [6B10]
15 times USB Host VBUS overcurrent [9000]
16 times Pump roller sensor error [5C20]
19 times Ink tank position sensor error [6502]
20 times Other hardware error [6500]
Power LED turned off,
Alarm LED lit
ROM error
Power LED lit,
Alarm LED lit
RAM error
*1: Before replacement of the logic board ass'y, check the ink absorber counter value (by service test print or EEPROM
information print). If the counter value is 7% or more, also replace the ink absorber kit (QY5-0176) when replacing
the logic board ass'y. See 5. SERVICE MODE, for details.